LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System

Configured for laboratory and production workflows

LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System is a dynamic and fatigue testing systems for cyclic materials testing for laboratory and production workflows.

Dynamic Force

±80 kN

Rated cyclic load

Static Force

±100 kN

Separate static rating

Frequency

0.01–50 Hz

Waveform dependent

Actuator

±75 mm

Axial travel

Direct Inquiry Technical Chat

LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System

Separate Dynamic and Static Ratings

The published configuration distinguishes the ±80 kN cyclic rating from the ±100 kN static envelope for clearer method planning.

Waveform-Flexible Servo-Hydraulic Drive

Closed-loop force and displacement control supports sine, triangle, rectangle, and combined loading programs from 0.01 to 50 Hz.

Extended-Stroke Actuator

A ±75 mm actuator supports material fatigue and component durability setups that need more travel than resonance systems typically provide.

Method-Configured Load Train

Grips, alignment hardware, extensometers, environmental systems, and software modules are selected around the specimen and required method.

Application & Search Guide

Testing Method

Dynamic and fatigue testing systems for cyclic materials testing

LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System is a servo-hydraulic dynamic and fatigue testing system for axial tension-compression fatigue, low-cycle and high-cycle programs, fracture-mechanics preparation, and component durability under the confirmed project-specific laboratory procedure. The published configuration provides ±80 kN dynamic force, ±75 mm actuator travel, and 0.01–50 Hz waveform control.

Technical FAQ

What is LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System used for?

LS-DFX-H80 Servo-Hydraulic Dynamic & Fatigue Test System is used for dynamic and fatigue testing workflows in civil engineering materials laboratories, quality control labs, research programs, and construction material acceptance testing.

Which standards does LS-DFX-H80 support?

LS-DFX-H80 supports the confirmed project-specific laboratory procedure. Lithostek can also configure reporting fields, accessories, and calibration documents around local project or laboratory requirements.

Can Lithostek configure LS-DFX-H80 for my laboratory?

Yes. Lithostek application engineers can review specimen format, target standards, throughput, power supply, data output, and training requirements before quoting a suitable configuration.