LS-FEI-0618 Flakiness & Elongation Index Gauge Set

Configured for BS 812-105.1, BS 812-105.2 workflows

LS-FEI-0618 Flakiness & Elongation Index Gauge Set is a fine aggregate angularity flow-time apparatus for BS 812-105.1, BS 812-105.2 workflows.

Flakiness

0.6 ratio

Seven-slot thickness plate

Elongation

1.8 ratio

Six-fraction pin gauge

Fractions

6.3-63 mm

Method-dependent range

Operation

Manual

No power required

Direct Inquiry Technical Chat

LS-FEI-0618 Flakiness & Elongation Index Gauge Set BS 812-105.1, BS 812-105.2

Two Clearly Separated Shape Methods

The matched set keeps thickness-based flakiness and length-based elongation measurements distinct while supporting one classification workflow.

Seven Controlled Thickness Slots

Graduated openings cover the specified coarse-aggregate fractions without relying on visual judgement alone.

Six-Fraction Length Gauge

Fixed pin spacing gives each classified sieve fraction a repeatable pass-or-retain length check.

Protected Manual Set

Passive metal gauges require no calibration electronics and store together in a rigid protective case.

Standards

Standard

BS 812-105.1

BS 812-105.2

Application & Search Guide

Testing Method

Fine aggregate angularity by flow time

LS-FEI-0618 Flakiness & Elongation Index Gauge Set is a stainless fine aggregate angularity flow apparatus with interchangeable 12 mm and 16 mm outlets. It compares manufactured sand and fine aggregate by controlled discharge time without presenting the method as ASTM C1252 uncompacted voids testing.

Technical FAQ

What is LS-FEI-0618 Flakiness & Elongation Index Gauge Set used for?

LS-FEI-0618 Flakiness & Elongation Index Gauge Set is used for fine aggregate angularity flow time workflows in civil engineering materials laboratories, quality control labs, research programs, and construction material acceptance testing.

Which standards does LS-FEI-0618 support?

LS-FEI-0618 supports BS 812-105.1, BS 812-105.2. Lithostek can also configure reporting fields, accessories, and calibration documents around local project or laboratory requirements.

Can Lithostek configure LS-FEI-0618 for my laboratory?

Yes. Lithostek application engineers can review specimen format, target standards, throughput, power supply, data output, and training requirements before quoting a suitable configuration.